3 Legged Thing Ellie Universal L-Bracket With Peak Design Base - Metallic Slate Grey
3 Legged Thing Ellie Universal L-Bracket With Peak Design Base - Metallic Slate Grey
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality.
L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon.
Ellie PD is specifically designed to work with Peak Design's Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture.
Choice of FOUR different base units
Ellie has four possible base options giving an unprecedented level of compatibility. With two shoe choices - Arca or Peak Design V3 Capture, and two base lengths - Standard and Short, there's an Ellie to suit every camera.
Figure Hugging
With two-axis adjustments, Ellie fits more cameras than any other universal L-Bracket, with an unprecedented level of functionality.
Modular
Ellie's detachable release plate can be used in isolation, or with the vertical aspect. Dual Arca-Swiss profile sides and symmetrical 1/4"-20 threaded ends enable the vertical axis to be configured in 8 positions, enabling more cable access than ever before.
ELLIE PD
Ellie PD is identical to the original Ellie, but has a shoe compatible with Peak Design V3 Capture system. Also compatible with Arca-Swiss, and featuring screen slope and strap connector.
Adaptable. Adjustable. Innovative.
Ellie's unique vertical aspect has dual-Arca Swiss profiled edges, and symmetrical ends with twin 1/4"-20 threads, enabling 8 possible side configurations. This gives Ellie unprecedented compatibility and functionality
For Those About To Rock
Ellie's uniquely configurable side aspect enables users to transform almost any standard ball-head into a long-lens rocker.
Features:
- Universal Peak Design Capture-compatible L-Bracket for mirrorless and DSLR cameras
- Choice of two screw mount slots for optimal positioning of the camera
- Adjustable base length thanks to rigid stainless steel rods held in place with stainless steel screws
- Opening in vertical aspect can be set in one of four positions for better cable and accessory connections
- Dual 1/4"-20 screw mounts on vertical aspect for adding accessories (monitors, microphones etc) *Due to the nature of thisĀ
product, these mounts are not suitable for direct connection of single-mount sling straps* - Precision engineered plate profiles for secure connection to your tripod head
- Vertical aspect can be mounted downward to create a rocker mount for your tripod
- Rear of base plate is sloped to better enable screen access
- Detachable release plate base can be used in isolation
- Base slot for strap attachment
- *Peak Design Capture v3 only
Compatible With:
Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellieās vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Dimensions:
Base Length: 85mm / 3.35"
Working Base Length: 95mm - 128mm / 3.74ā - 5.04"
Vertical Aspect Height: 85mm / 3.35"
Base Width: 38mm / 1.5"
Side Width: 38mm / 1.5"
Weight:
Weight Ellie: 0.21 lbs
Weight Ellie PD: 0.21 lbs
Materials:
Aerospace-Grade Magnesium Alloy & Stainless Steel
Product SKU:
ELLIE-PD-G
In The Box:
3 Legged Thing Ellie Universal L-Bracket With Peak Design Base - Metallic Slate Grey (Arca-Swiss and Peak Design Capture-Compatible Quick Release L-Bracket with 85mm Base)
Stagsden Stainless Steel Camera Screw
Dual-Ended Mini Tool with two hex keys for adjustment of vertical aspect and to secure stainless steel sliding rods into place
Product Information
Product Information
Shipping & Returns
Shipping & Returns
3 Legged Thing Ellie Universal L-Bracket With Peak Design Base - Metallic Slate Grey
3 Legged Thing Ellie Universal L-Bracket With Peak Design Base - Metallic Slate Grey
3 Legged Thing Ellie Universal L-Bracket With Peak Design Base - Metallic Slate Grey
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality.
L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon.
Ellie PD is specifically designed to work with Peak Design's Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture.
Choice of FOUR different base units
Ellie has four possible base options giving an unprecedented level of compatibility. With two shoe choices - Arca or Peak Design V3 Capture, and two base lengths - Standard and Short, there's an Ellie to suit every camera.
Figure Hugging
With two-axis adjustments, Ellie fits more cameras than any other universal L-Bracket, with an unprecedented level of functionality.
Modular
Ellie's detachable release plate can be used in isolation, or with the vertical aspect. Dual Arca-Swiss profile sides and symmetrical 1/4"-20 threaded ends enable the vertical axis to be configured in 8 positions, enabling more cable access than ever before.
ELLIE PD
Ellie PD is identical to the original Ellie, but has a shoe compatible with Peak Design V3 Capture system. Also compatible with Arca-Swiss, and featuring screen slope and strap connector.
Adaptable. Adjustable. Innovative.
Ellie's unique vertical aspect has dual-Arca Swiss profiled edges, and symmetrical ends with twin 1/4"-20 threads, enabling 8 possible side configurations. This gives Ellie unprecedented compatibility and functionality
For Those About To Rock
Ellie's uniquely configurable side aspect enables users to transform almost any standard ball-head into a long-lens rocker.
Features:
- Universal Peak Design Capture-compatible L-Bracket for mirrorless and DSLR cameras
- Choice of two screw mount slots for optimal positioning of the camera
- Adjustable base length thanks to rigid stainless steel rods held in place with stainless steel screws
- Opening in vertical aspect can be set in one of four positions for better cable and accessory connections
- Dual 1/4"-20 screw mounts on vertical aspect for adding accessories (monitors, microphones etc) *Due to the nature of thisĀ
product, these mounts are not suitable for direct connection of single-mount sling straps* - Precision engineered plate profiles for secure connection to your tripod head
- Vertical aspect can be mounted downward to create a rocker mount for your tripod
- Rear of base plate is sloped to better enable screen access
- Detachable release plate base can be used in isolation
- Base slot for strap attachment
- *Peak Design Capture v3 only
Compatible With:
Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellieās vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Dimensions:
Base Length: 85mm / 3.35"
Working Base Length: 95mm - 128mm / 3.74ā - 5.04"
Vertical Aspect Height: 85mm / 3.35"
Base Width: 38mm / 1.5"
Side Width: 38mm / 1.5"
Weight:
Weight Ellie: 0.21 lbs
Weight Ellie PD: 0.21 lbs
Materials:
Aerospace-Grade Magnesium Alloy & Stainless Steel
Product SKU:
ELLIE-PD-G
In The Box:
3 Legged Thing Ellie Universal L-Bracket With Peak Design Base - Metallic Slate Grey (Arca-Swiss and Peak Design Capture-Compatible Quick Release L-Bracket with 85mm Base)
Stagsden Stainless Steel Camera Screw
Dual-Ended Mini Tool with two hex keys for adjustment of vertical aspect and to secure stainless steel sliding rods into place
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
3 Legged Thing Ellie Universal L-Bracket With Peak Design Base - Metallic Slate Grey
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality.
L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon.
Ellie PD is specifically designed to work with Peak Design's Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture.
Choice of FOUR different base units
Ellie has four possible base options giving an unprecedented level of compatibility. With two shoe choices - Arca or Peak Design V3 Capture, and two base lengths - Standard and Short, there's an Ellie to suit every camera.
Figure Hugging
With two-axis adjustments, Ellie fits more cameras than any other universal L-Bracket, with an unprecedented level of functionality.
Modular
Ellie's detachable release plate can be used in isolation, or with the vertical aspect. Dual Arca-Swiss profile sides and symmetrical 1/4"-20 threaded ends enable the vertical axis to be configured in 8 positions, enabling more cable access than ever before.
ELLIE PD
Ellie PD is identical to the original Ellie, but has a shoe compatible with Peak Design V3 Capture system. Also compatible with Arca-Swiss, and featuring screen slope and strap connector.
Adaptable. Adjustable. Innovative.
Ellie's unique vertical aspect has dual-Arca Swiss profiled edges, and symmetrical ends with twin 1/4"-20 threads, enabling 8 possible side configurations. This gives Ellie unprecedented compatibility and functionality
For Those About To Rock
Ellie's uniquely configurable side aspect enables users to transform almost any standard ball-head into a long-lens rocker.
Features:
- Universal Peak Design Capture-compatible L-Bracket for mirrorless and DSLR cameras
- Choice of two screw mount slots for optimal positioning of the camera
- Adjustable base length thanks to rigid stainless steel rods held in place with stainless steel screws
- Opening in vertical aspect can be set in one of four positions for better cable and accessory connections
- Dual 1/4"-20 screw mounts on vertical aspect for adding accessories (monitors, microphones etc) *Due to the nature of thisĀ
product, these mounts are not suitable for direct connection of single-mount sling straps* - Precision engineered plate profiles for secure connection to your tripod head
- Vertical aspect can be mounted downward to create a rocker mount for your tripod
- Rear of base plate is sloped to better enable screen access
- Detachable release plate base can be used in isolation
- Base slot for strap attachment
- *Peak Design Capture v3 only
Compatible With:
Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellieās vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Dimensions:
Base Length: 85mm / 3.35"
Working Base Length: 95mm - 128mm / 3.74ā - 5.04"
Vertical Aspect Height: 85mm / 3.35"
Base Width: 38mm / 1.5"
Side Width: 38mm / 1.5"
Weight:
Weight Ellie: 0.21 lbs
Weight Ellie PD: 0.21 lbs
Materials:
Aerospace-Grade Magnesium Alloy & Stainless Steel
Product SKU:
ELLIE-PD-G
In The Box:
3 Legged Thing Ellie Universal L-Bracket With Peak Design Base - Metallic Slate Grey (Arca-Swiss and Peak Design Capture-Compatible Quick Release L-Bracket with 85mm Base)
Stagsden Stainless Steel Camera Screw
Dual-Ended Mini Tool with two hex keys for adjustment of vertical aspect and to secure stainless steel sliding rods into place
