Pelican 1150 Protector Case with Pick-N-Pluck Foam & Lid Foam - Orange
Pelican 1150 Protector Case with Pick-N-Pluck Foam & Lid Foam
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.Ā
TheĀ foam set is an easy do-it-yourself system for customizing the interior of your case. Layers of foam are pre-scored in tiny cubes. Simply lay your equipment on the foam, tape or chalk to mark the foam, and pluck away. Always allow at least one inch of foam between your equipment and the wall of the case.
Features:
- Pick N Pluck with convoluted lid foam
- Watertight, crushproof, and dustproof
- Open cell core with solid wall design - strong, light weight
- Automatic pressure equalization valve - balances interior pressure, keeps water out
- O-ring seal
- Stainless steel hardware
- Lifetime Guarantee of Excellence
Dimensions:
Dimensions:
Interior (LĆWĆD): 8.29 x 5.79 x 3.75 in
Exterior (LĆWĆD): 9.44 x 7.8 x 4.29 in
Measurements:
Lid Depth: 0.75"Ā
Bottom Depth: 2.87"Ā
Total Depth: 3.62"Ā
Int Volume: 0.1 ftĀ³Ā
Padlock Hole Diameter: 0.19"
Weights:
Weight With Foam: 1.75 lbs
Weight Empty: 1.61 lbsĀ
Buoyancy: 8 lbsĀ
Materials:
- Body Material: Polypropylene
- Latch Material: Polypropylene
- O-Ring Material: Polymer
- Pins Material: Stainless Steel
- Foam Material: 1.3 lb Polyurethane
- Purge Body Material: ABS
- Purge Vent Material: 3 Micron Hydrophobic Non-Woven
Configurations:
- 1150 StandardĀ
- 1150NF No Foam
- 1150WF With Foam
Product SKU:
1150-000-150
In The Box:
Pelican 1150 Protector Case - Orange
Pick-N-Pluck Foam Layers
Foam Layer 1 (Lid) - 0.75" Convolute
Foam Layer 2 (Base) - 2.50" Pick N Pluck (0.46" x 0.42" Squares)
Foam Layer 3 (Base) - 0.50" Solid
Limited Lifetime Manufacturer Warranty
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Pelican 1150 Protector Case with Pick-N-Pluck Foam & Lid Foam - Orange
Pelican 1150 Protector Case with Pick-N-Pluck Foam & Lid Foam - Orange
Pelican 1150 Protector Case with Pick-N-Pluck Foam & Lid Foam
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.Ā
TheĀ foam set is an easy do-it-yourself system for customizing the interior of your case. Layers of foam are pre-scored in tiny cubes. Simply lay your equipment on the foam, tape or chalk to mark the foam, and pluck away. Always allow at least one inch of foam between your equipment and the wall of the case.
Features:
- Pick N Pluck with convoluted lid foam
- Watertight, crushproof, and dustproof
- Open cell core with solid wall design - strong, light weight
- Automatic pressure equalization valve - balances interior pressure, keeps water out
- O-ring seal
- Stainless steel hardware
- Lifetime Guarantee of Excellence
Dimensions:
Dimensions:
Interior (LĆWĆD): 8.29 x 5.79 x 3.75 in
Exterior (LĆWĆD): 9.44 x 7.8 x 4.29 in
Measurements:
Lid Depth: 0.75"Ā
Bottom Depth: 2.87"Ā
Total Depth: 3.62"Ā
Int Volume: 0.1 ftĀ³Ā
Padlock Hole Diameter: 0.19"
Weights:
Weight With Foam: 1.75 lbs
Weight Empty: 1.61 lbsĀ
Buoyancy: 8 lbsĀ
Materials:
- Body Material: Polypropylene
- Latch Material: Polypropylene
- O-Ring Material: Polymer
- Pins Material: Stainless Steel
- Foam Material: 1.3 lb Polyurethane
- Purge Body Material: ABS
- Purge Vent Material: 3 Micron Hydrophobic Non-Woven
Configurations:
- 1150 StandardĀ
- 1150NF No Foam
- 1150WF With Foam
Product SKU:
1150-000-150
In The Box:
Pelican 1150 Protector Case - Orange
Pick-N-Pluck Foam Layers
Foam Layer 1 (Lid) - 0.75" Convolute
Foam Layer 2 (Base) - 2.50" Pick N Pluck (0.46" x 0.42" Squares)
Foam Layer 3 (Base) - 0.50" Solid
Limited Lifetime Manufacturer Warranty
Original: $59.95
-65%$59.95
$20.98Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Pelican 1150 Protector Case with Pick-N-Pluck Foam & Lid Foam
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.Ā
TheĀ foam set is an easy do-it-yourself system for customizing the interior of your case. Layers of foam are pre-scored in tiny cubes. Simply lay your equipment on the foam, tape or chalk to mark the foam, and pluck away. Always allow at least one inch of foam between your equipment and the wall of the case.
Features:
- Pick N Pluck with convoluted lid foam
- Watertight, crushproof, and dustproof
- Open cell core with solid wall design - strong, light weight
- Automatic pressure equalization valve - balances interior pressure, keeps water out
- O-ring seal
- Stainless steel hardware
- Lifetime Guarantee of Excellence
Dimensions:
Dimensions:
Interior (LĆWĆD): 8.29 x 5.79 x 3.75 in
Exterior (LĆWĆD): 9.44 x 7.8 x 4.29 in
Measurements:
Lid Depth: 0.75"Ā
Bottom Depth: 2.87"Ā
Total Depth: 3.62"Ā
Int Volume: 0.1 ftĀ³Ā
Padlock Hole Diameter: 0.19"
Weights:
Weight With Foam: 1.75 lbs
Weight Empty: 1.61 lbsĀ
Buoyancy: 8 lbsĀ
Materials:
- Body Material: Polypropylene
- Latch Material: Polypropylene
- O-Ring Material: Polymer
- Pins Material: Stainless Steel
- Foam Material: 1.3 lb Polyurethane
- Purge Body Material: ABS
- Purge Vent Material: 3 Micron Hydrophobic Non-Woven
Configurations:
- 1150 StandardĀ
- 1150NF No Foam
- 1150WF With Foam
Product SKU:
1150-000-150
In The Box:
Pelican 1150 Protector Case - Orange
Pick-N-Pluck Foam Layers
Foam Layer 1 (Lid) - 0.75" Convolute
Foam Layer 2 (Base) - 2.50" Pick N Pluck (0.46" x 0.42" Squares)
Foam Layer 3 (Base) - 0.50" Solid
Limited Lifetime Manufacturer Warranty
